Solar energy
Accessories & mounting systems
Rails, fixings, cables, connectors and protection enclosures for a durable, compliant installation.
What our proposal covers
Every proposal specifies the following, matched to your site and usage.
- Roof types
- On request
- Materials
- On request
- Corrosion resistance
- On request
- Compliance
- On request
What holds the array up for twenty years
Modules carry performance warranties measured in decades. What holds them in place, connects them and protects them has to last as long — and that is almost always where premature failures appear.
Corrosion is the first enemy, particularly on the coast. It turns on the quality of alloys and fixings, but above all on galvanic couples: two badly matched metals degrade far faster than the weaker of the two on its own. The second point is cabling. Cable not rated for permanent UV exposure hardens and cracks within a few seasons, and connectors of different makes mated together — mechanically compatible, electrically approximate — cause heating and arcing.
The mounting system is chosen from the actual roof: profiled steel, tile, fibre cement, flat roof or ground mount call for neither the same fixings nor the same waterproofing detail. Add surge protection and earthing, indispensable in a thunderstorm climate.
We supply the whole set as a coherent package, with references and compliance detailed in the proposal.
Catalogue
In the catalogue
-
Wall or ground solar panel mount
Anodised aluminium or galvanised steel, tilt adjustable from 15° to 45°, supplied as a ready-to-assemble kit.
Technical specifications
- Materials
- Anodised aluminium or hot-dip galvanised steel
- Surface treatment
- Anti-corrosion (zinc + optional epoxy paint)
- Adjustable tilt angle
- 15° to 45° depending on configuration and latitude
- Installation
- Wall mounting for façades, balconies or vertical roofs
- Ground mounting on concrete pads, ground screws or modular structures
- Compatibility
- Solar panels from 50 W to 600 W (all standard formats)
- Permissible load
- Up to 5400 Pa (snow) / 2400 Pa (wind)
- Mechanical strength
- To EN 1991 / EC1
- Fasteners
- A2/A4 stainless steel, anti-corrosion
- Assembly
- Simple and quick, supplied as a ready-to-assemble kit
- Standards
- ISO 9001 / CE / IEC 61215 (solar module compatibility)
-
Victron active GPS antenna for GX GSM and GX LTE
Active antenna with magnetic base and 3 m cable, for geolocating monitored installations.
Technical specifications
- Antenna type
- Active GPS (integrated LNA amplifier)
- Operating frequency
- 1575.42 MHz (GPS L1)
- Amplifier gain
- 28 dB typical
- Supply voltage
- 3 – 5 V DC
- Impedance
- 50 Ω
- Connector
- SMA male (Victron GX standard)
- Cable length
- 3 metres
- Cable type
- High-quality RG174
- Polarisation
- Right-hand circular (RHCP)
- Bandwidth
- ±10 MHz
- VSWR
- < 2.0
- Sensitivity
- -160 dBm
- Operating temperature
- -40 °C to +85 °C
- Protection rating
- IP67 (dust and moisture)
- Mounting
- Integrated magnetic base or adhesive pad
- Dimensions
- 46 × 38 × 15 mm
- Weight
- 50 g
Need a quote?
Our teams will reply with a proposal matched to your site.